The STSPIN820 is a stepper motor driver whichintegrates, in a small QFN 4 x 4 mm package,both control logic and a low RDSon power stage.
The integrated controller implements a PWMcurrent control with fixed OFF TIme and a microstepping resoluTIon up to 1/256th of the step.
The device can be forced into a low consumpTIonstate.The device offers a complete set of protecTIonfeatures including overcurrent, overtemperatureand short-circuit protection.
Operating voltage from 7 to 45 V
Maximum output current 1.5 Arms
RDSon HS + LS = 1 typ.
Microstepping up to 1/256th of step
Current control with programmable OFF time
Current sensing based on external shuntresistor
Full protection set
Non-dissipative overcurrent protection
Standby low consumption
Industrial 2D printers
Textile and sewing machines
CCTV, security and dome cameras
ATM and cash handling machines
Office and home automation
The X-NUCLEO-IHM14A1 motor driver expansion board is based on the STSPIN820 monolithic driver for stepper motors.
It represents an affordable, easy-to-use solution for driving stepper motors in your STM32 Nucleo project, implementing motor driving applications such as 2D/3D printers, robotics and security cameras.
The STSPIN820 implements a PWM current control with constant OFF time adjustable via an external resistor and a microstepping resolution up to the 256th step.
The X-NUCLEO-IHM14A1 expansion board is compatible with the Arduino UNO R3 connector and the ST morpho connector, so it can be plugged to the STM32 Nucleo development board and stacked with additional X-NUCLEO expansion boards.
Operating voltage: 7 to 45 V
Output current up to 1.5 Arms
Fine tuning microstepping up to the 256th step
Current control with adjustable OFF time
Full protection set:
Under voltage lock out
Compatible with Arduino UNO R3 connector
Compatible with STM32 Nucleo boards
The X-NUCLEO-IHM14A1 expansion board for STM32 Nucleo is a stepper motor driver covering a wide range of applications.
ST公司的STS PI N820是集成了...[详细]